Silent Made In Turkey Pool Pumps ONEN KIMYA 1.5 HP-Monophase 220V Swimming Pool Pump With Filter And Record Key Blue Color

Product details

ONEN Elite Model Pool Pump. Monoblock, pressure-resistant thermoplastic body, large pre-filter, self-priming, transparent cover, easy-to-clean filter. It is produced at frequencies of 50 Hz and 60 Hz. Can be used as a pool circulation pump in swimming pools, SPAs, and inground type pools. Filter water inlet and outlet record switch is supplied with the pump. It is used for filtration, water circulation, and disinfection in swimming pools, ornamental, and process pools. Thanks to the large volume front body of the pool pump, it offers a large plastic filter basket. It provides circulation of the pool water and ensures the filtration of particles larger than 2.5 mm. The transparent and durable filter cover of the ONEN Elite Model Pool Pump makes it easy to visually check the contamination status of the filter without opening the pump. The filter cover key is supplied with the products for filter replacement. In this way, it offers economical use with the possibility of removing the filter and cleaning it easily when necessary. The parts in the pump are resistant to pool chemicals. The body and internal parts are made of technopolymer material and the pump shaft is made of AISI 304 stainless steel material. It is produced in 5 different capacities as 0.75 HP, 1 HP, 1.5 HP, 2 HP, and 3 HP according to the pool size. Our 2 HP and 3 HP models can be purchased as single-phase or three-phase. For other models, only the single-phase option is available. If the installation pipes are kept in large diameter, it works silently and smoothly. The filter cover key is sent with the product. In case of air bubbles in the filter cover, the filter cover should be opened and the air should be discharged by means of the cover key. The motors of our single-phase pool pumps are thermally protected against overheating. When the motor overheats, the thermal protection is activated and stops the pump from running and reactivates it when it drops to the ideal temperature. It is easy to install as the suction pressure nozzle is designed in similar dimensions to many products in the market. High efficiency and resistant to heat and humidity. The filter cover can be easily removed thanks to the filter record key included in the box, and the suction and discharge connection records can also be easily removed and installed thanks to the special key. The motor body is made of durable aluminum material. It operates up to a maximum pressure of 6 BAR. Motor protection class is IP54. Pump withstand pressure (PMAX): 3 BAR. Pump body is made of PPH material. Insulation class: F. Mechanical seal: Ceramic/Carbon. Impeller: Noryl. Maximum flow rate is 35 m3/hour. Maximum liquid pumping height is 22 meters. Liquid discharge temperature is 0-45 Celsius. Maximum dry running time is 1 minute. Sealing: Mechanical seal - Carbon/Ceramic.

About the supplier

ONEN KIMYA 7 products total Visit supplier page