Wooden Batten Spacing For Roofs And Shear Walls Construction Guidelines

Product details

The spacing of wooden batten is determined according to the thickness of the roof concrete. In general, if the thickness of the roof is less than 0.15m, the spacing of the wooden batten should be 180mm. If the shear wall and width of columns or beams are more than 1 meter, must be an additional fixed framework. Shear wall: the wood batten spacing according to the height and thickness of the wall to adjust the spacing. For example, take a wall of height 2.8m and thickness of 0.3m The wooden batten spacing should be 170mm. The wood batten and the vertical rib of the board should be mutually perpendicularly fixed. The nail should be from the edge 15mm-30mm, the nail force should be moderate, and the nail length should be 40mm50mm, should not be too long or too short. No gaps shall be left when the shear wall and column together form the board, and there must be a wooden batten in the internal corner (bottom of the wall) so that beams, walls, and WEP sheet can be connected. Shear wall formwork must be put together first into a whole then lifted, and then spread flat, to reduce labour Intensity, at the same time, forms a good effect. The beam bottom must be set aside a 15mm spigot, a wooden spigot, so as not to leak concrete mortar and save materials.

About the supplier

Sengol Exports 2 products total Visit supplier page